AresTradingLab
  1. API crude stocks Tue 4:30pm ET
  2. EIA crude stocks Wed 10:30am ET
  3. US oil rig count Fri 1:00pm ET
  4. CFTC positioning Fri 3:30pm ET

Times in New YorkLatest: weekly outlook, 16 Nov

Volume profile and the market auction

Cracks, spreads and flows move crude. Auction market theory shows where the market accepts the move. This is the framework: how value is defined, where the levels come from, what counts as acceptance, and how the barrel decides which levels hold.

The market is an auction

Price advertises for the other side. It moves until it finds enough opposing business to stop. Time and volume at a price tell you whether the advert worked: build time and volume, accepted; trade thin and leave fast, rejected.

Two states:

  • Balance. Two-sided trade around agreed value, rotating between the extremes. The default. In crude it can last weeks between catalysts.
  • Imbalance. One side in control because information changed fair value. Price moves until it finds enough opposing trade to start a new balance.

Every note answers three questions:

  1. Where is value? See timeframes.
  2. Is price away from value accepted or rejected? Time, volume, and what the developing value area does.
  3. Who is in control? Initiative buyers building value higher, initiative sellers building it lower, or responsive trade pulling price back to the middle.

The data behind the profiles

From a volume bar to a volume profileOn the left, a session drawn as one candle with one volume bar, which only shows the total. On the right, the same volume split up by price and turned on its side, showing most of it traded near the bottom of the range.PriceVolumesplit by priceVolume at each price
One session as a candle with its volume bar, and as a profile. The profile keeps the distribution the bar throws away: here most of the volume traded in the lower half.
Anatomy of a volume profileA sideways histogram of volume at each price. The longest bar is the point of control at $96.0. The value area, the 70% of volume around it, runs from $95.4 to $96.7. A second, smaller peak higher up is a high-volume node at $97.8, and the thin area between the two peaks is a low-volume node at $97.1.$98.4$98.0$97.6$97.2$96.8$96.4$96.0$95.6$95.2VaL$95.4, value area lowVaH$96.7, value area highPoC$96.0, most volumeHVN$97.8, high-volume nodeLVN$97.1, low-volume nodeVolume traded at each price →
Profile anatomy on this site. Blue bars: value area. Bronze bar: PoC. Shaded band: VaL to VaH.

Data. Profiles are built from exchange futures, NYMEX WTI (CL) and ICE Brent (B), so volume is contract volume, not tick volume. Levels use the most active contract month by volume. Composites that span a roll are rebuilt on the new contract only, so old-contract value is never carried into the new one. CFD and spot quotes trade at a basis to futures, so levels on a broker chart sit off by that amount. Posts before 16th November 2026 used a CFD feed (USOUSD).

The levels

Point of control (PoC)

Highest-volume price. Fair value for the period. In balance it's a magnet and slows price, because both sides will trade there. A distant PoC is a target. Price sitting on the PoC means slow, two-sided trade. Size down your expectations.

Value area (VA), value area high (VaH) and value area low (VaL)

The range holding about 70% of the volume, built out from the PoC by adding the heavier adjacent price each step. The edges are where opinion gets tested: responsive sellers above VaH, responsive buyers below VaL. Acceptance or rejection outside value decides most setups here. See acceptance.

High-volume node (HVN)

A secondary volume peak, a smaller area of agreement. Depth on both sides, so it slows price: support, resistance or a pause. Strength scales with time spent building it. A multi-day balance holds far more inventory than a node built in a few hours, and takes far more trade to clear.

Low-volume node (LVN)

A volume trough, left where one side was in control and price moved too fast for two-sided trade. Two jobs:

  • Boundary. It usually separates two value areas. First return from either side gets a reaction.
  • Transit. Once price is accepted inside it, it travels through to the next HVN. An LVN is not support or resistance.

Naked (untested) PoC

A prior PoC not yet revisited. Unfinished business, and a target until it trades.

Developing PoC and value

Intraday PoC and value area. A developing PoC following price confirms value is being built there. Price extending while the developing PoC lags means the move isn't accepted yet.

LevelDefinitionBehaviour
PoCHighest-volume priceMagnet in balance
VaHTop of the 70% value areaResponsive selling; acceptance above = value moving up
VaLBottom of the 70% value areaResponsive buying; acceptance below = value moving down
HVNSecondary volume peakSupport and resistance; slows a move
LVNVolume troughReaction on first test; fast transit once accepted inside
Naked PoCPrior PoC not revisitedTarget; dead once traded through

Levels are zones. Feeds and session settings shift them by a few ticks. Setups here give an entry zone and put the stop beyond the level, not on it.

Profile shape

A finished session's shape records who ran the auction.

D-shape: balance. Volume centred, tapering at both ends. Without new information, rotation inside value next session.

P-shape. Thin lower tail, volume built at the top. Often short covering, not fresh buying. It runs out once the shorts are out.

b-shape. Thin upper tail, volume built at the bottom. Often long liquidation, not fresh selling.

Thin profile: trend. Volume spread thin over a wide range. One side drove it and value never formed.

Double distribution. Two value areas split by an LVN. Value relocated intraday, usually on news.

Five session shapes. Blue bars: value area. Bronze bar: PoC.

A single-print tail at an extreme is excess: the market overshot, found nobody and reversed hard. Durable high or low. A session that closes flat on its high or low with no tail leaves a poor high or poor low, an unfinished auction that usually gets revisited.

Balance, imbalance and value migration

Where value sits session to session is the main read on control.

Value migrating from one balance area to anotherFive sessions. On days one and two the value areas overlap: the market is in balance. Day three breaks out and builds value higher: imbalance. Days four and five overlap again at the higher level: a new balance.BalanceImbalanceNew balance$93.0$94.0$95.0$96.0$97.0Day 1Day 2Day 3Day 4Day 5Day's rangeValue areaPoC
Days 1 and 2 overlap: balance. Day 3 builds value higher: imbalance. Days 4 and 5 overlap at the higher level: new balance, old VaH now support.
Value vs prior sessionRead
Higher, no overlapBuyers in control; value migrating up
Overlapping, higherTentative up; buyers have the edge
InsideBalance; waiting on information
Outside both sidesTwo-sided expansion; often precedes a bigger move
Overlapping, lowerTentative down; sellers have the edge
Lower, no overlapSellers in control; value migrating down

The longer a balance holds, the more inventory inside it, the more stops outside it, the bigger the break. In crude the trigger is usually fundamental: EIA, OPEC+, a Gulf headline.

Initiative and responsive trade

  • Responsive: opposing a move away from value. Selling above VaH, buying below VaL. Keeps balance.
  • Initiative: following a move away from value. Buying above VaH, selling below VaL. Once accepted, it builds new value.

Responsive trade at the edges is normal in balance. Accepted initiative trade starts an imbalance. Fading it is how balance profits get handed back.

Acceptance and rejection

Most setups here come down to whether price leaving value is accepted or rejected.

VaHPoCVaLHolds above: acceptance VaHPoCVaLBack inside: rejection
Acceptance: break above VaH, retest from above holds, VaH becomes support. Rejection: probe above VaH finds no trade and rotates back through value to the PoC, then VaL.

A break is accepted when:

  • price closes beyond the level on the execution timeframe (usually hourly here);
  • a retest from the far side holds;
  • the developing PoC and value area move towards the new prices.

Rejection: a probe outside value that builds no time or volume and comes back fast, often leaving a tail. Above VaH that's a look above and fail. Below VaL, a look below and fail. Both point to the other side of value.

The 80% rule (an open outside value that re-enters and holds for two 30-minute periods tends to cross the value area) is a tendency, not a statistic. The logic holds anyway: once a break fails, the far side of value is the next place with real trade.

Volume on the break

The profile shows where volume traded. Time-series volume shows whether a move has participation. Each bar's range against its volume, relative to recent bars on the same feed:

avg

Wide range, high volume. Participation confirms the move.

avg

Narrow range, low volume. Nobody pressing. Tells you nothing.

avg

Wide range, low volume. Unsupported, easily reversed. Typical of headline spikes in thin liquidity.

avg

Narrow range, high volume. Heavy trade, no progress. Opposing orders are absorbing the move. Often the first sign it's tiring.

Dashed line: average volume. Bronze bars: range and volume diverging.

Same test over a sequence. A trend with expanding volume has participation. Extension on fading volume means fewer people pressing. Vulnerable.

Rising price, rising volume Rising price, falling volume
Left: volume rises with each up bar. Participation supports the trend. Right: ranges widen while volume peaks on bar two and fades. The buying is drying up.

Breakouts and retests

The best check uses both. A break that gets accepted usually comes on expanding volume, because moving price off established value takes real participation. The retest should come on light volume, showing the other side isn't back in size, then volume expands again as the move develops.

Breakout from a balance areaPrice rotates between a floor and a ceiling on ordinary volume. It breaks above the ceiling on the highest volume of the chart, pulls back to test the old ceiling on low volume, and then trends higher with volume rising again.Ceiling (VaH)Floor (VaL)BalanceBreak on strong volumeTest on low volumeTrend: volume rises again
Break above a balance. Volume expands on the break (bronze), contracts on the retest of the old ceiling, expands again as price trends away. Low-volume break or heavy-volume retest: the break is suspect.

The warnings are the inverse. A break on light volume is a probe nobody backed. It usually rotates back into value. A retest on heavy volume at the old level means the other side is back. The break is in doubt.

Volume spikes

  • Spike after an extended move. Sharp volume at the end of a long run, often with a long wick and a close off the extreme: late entry or forced exit. If the next bars don't extend, the leg is done, and the profile usually shows excess there.
  • Sustained heavy volume, no progress. Repeated high-volume, narrow-range bars at one price. Opposing orders are absorbing everything. It leaves an HVN that acts as support or resistance later.

The open

Where the open sits against the prior session's range and value sets the likely day type.

HighVaHPoCVaLLow

Inside value. Balance continues. Rotate VaH to VaL: fade the edges, trade a break only once accepted.

HighVaHPoCVaLLow

Outside value, inside range. Tests whether prior value still holds. Re-entry and acceptance target the far side of value. Holding outside means value is moving.

HighVaHPoCVaLLow

Outside range. Strongest imbalance signal, often after overnight or weekend news. No quick return into range, trend day in play, early fades are poor.

The open (bronze dot) against the prior session's range, value area and PoC. Opens below value mirror these.

Early activity grades conviction. An open drive away without a retest: high conviction. A test of a reference then a drive the other way: less. Two-sided rotation around the open: still in balance, waiting.

Timeframes and composite profiles

Three profile types:

  • Daily (session) profiles. Prior session's PoC, VaH, VaL frame the next one. Prefixed d (dPoC, dVaH, dVaL).
  • Composite profiles. Several sessions merged, usually the last 5 or the full current balance. Bigger-picture value. They outrank single sessions.
  • Higher-timeframe profiles. Weekly and monthly. Major value areas and the LVNs between them, where trends run.

Levels that line up across timeframes (a daily VaH just under a composite VaH, say) count for more than either alone. When they conflict, the higher timeframe usually wins: a daily breakout into a composite HVN is a trade into resistance. Each post's level board says which profile every label comes from.

VWAP and anchored VWAP

PoC is the most-traded price. VWAP is the average price paid. Above session VWAP, that session's participants are in profit on average. Below it, they're under water and sell rallies.

Anchored VWAPs run from events that reset positioning: an EIA release, an OPEC+ decision, a major swing. It's the average entry of everyone active since. It holds as support or resistance in a trend that started there. A sustained break means the event's move is being unwound.

Cracks, spreads, flows and the profile

The profile shows where value is. The barrel shows why it moves and whether the move sticks. Three reads, every session, before any level:

  • Spreads. WTI and Brent timespreads, front to Q1. Value migrating higher with prompt backwardation widening is initiative buying with physical behind it. Value migrating higher with spreads flat is paper, and it rotates back. Expiry squeezes in the front month are stripped out: read the next spread down.
  • Cracks. Diesel and gasoline cracks and the 3-2-1. Strong cracks keep refiners buying crude and put a floor under dips into value. A crack rolling over removes that floor.
  • Flows. Brent–WTI for the export arb, Cushing for the hub, US exports and Gulf Coast runs. A wide arb pulls US barrels out and drains coast stocks. A building hub flattens WTI's curve whatever the headline stock number says.

EIA is the clearest case. On 15th October an 8.6M bbl draw drove WTI out of balance around $94.1, through the composite PoC and above the composite VaH, leaving an LVN behind. The detail said otherwise: exports and lost output did the drawing, Cushing built 1.9M bbl and Brent–WTI collapsed by $2.8 in one session. The breakout had no follow-through barrels, and the next session came straight back to the daily VaH.

Big headlines don't always move value. A spike that comes straight back into value is a rejection: the market priced the news and decided fair value hasn't changed. If spreads didn't move with it, the war premium moved, not the barrel.

The process behind each note

  1. The barrel first. Timespreads, cracks, Brent–WTI, Cushing, exports. Which way is physical leaning, and is it leaning harder or softer than yesterday?
  2. Higher timeframe. Composite PoC, VaH, VaL, main HVNs and LVNs, higher-timeframe support and resistance. Balancing or trending?
  3. Prior session. PoC, VaH, VaL, naked PoCs, poor highs and lows, excess.
  4. Value placement. Prior session's value against the one before. Who's in control, and does the curve agree?
  5. Calendar. EIA, API, expiries, OPEC+. Size down around them.
  6. Pivot and scenarios. The level that decides the session. Plan for acceptance above and below, targets at the next levels each way.
  7. Execution. No entry until the level is accepted or rejected. Volume checked on the break and the retest. Stop where the thesis fails, usually back inside the value price was meant to leave.

Every daily note follows this: the barrel, a pivot, a long on acceptance above, a short on acceptance below, targets at the next volume levels.

Where the read goes wrong

  • Reading the level without the barrel. A break of value on a headline, with spreads flat and cracks fading, gets reclaimed.
  • Levels as lines. They're zones. Stops go beyond them.
  • Fading every break of value. Responsive trades pay in balance and get run over in imbalance. Know the state first.
  • LVN as support. Once accepted inside, the next HVN is the target.
  • Ignoring the higher timeframe. A daily breakout into a composite HVN is a trade into resistance.
  • Trusting a low-volume break. Not a breakout until volume and acceptance confirm it.
  • Acting on the first touch. The touch tells you little. The response tells you everything.
  • Mixing data sources. Futures, CFD and session settings place levels differently. Pick one.

Notation

aVWAP
Anchored VWAP, from a chosen event or swing instead of the session open.
Composite
Several sessions merged, usually the last 5 or the current balance.
dPoC, dVaH, dVaL
Prior session's PoC, value area high and value area low.
Excess
Single-print tail at an extreme. Strong high or low.
HVN, LVN
High- and low-volume nodes: peaks and troughs in the profile.
Naked PoC
Prior PoC not yet revisited.
PoC
Point of control: highest-volume price.
Poor high, poor low
Session extreme with no tail. Unfinished auction.
VA, VaH, VaL
Value area (about 70% of volume around the PoC) and its edges.
VWAP
Volume-weighted average price for the period.

Further reading

J. Peter Steidlmayer, who built market profile at the CBOT in the 1980s; James Dalton, Mind Over Markets and Markets in Profile.

This page describes the method behind the analysis on this site and is not a recommendation to trade. Volume levels show where the market has traded, not where it will go. Read the risk disclaimer before trading on any idea from this site.